Installation of bimetallic radiators

Today, many water heating systems use not only cast-iron radiators or aluminum heaters, but also bimetallic sectional batteries. It doesn't matter if you live in a private house or in a multi-storey building, these radiators are perfect for you. In addition, it is even recommended to install them in apartment buildings, because in combination with centralized heating they allow for maximum efficiency.This fact can be explained by the fact that the radiators presented above, made of aluminum and steel, are able to easily withstand the inherent hydraulic shocks, system suffocation, high pressure, and coolant contamination, which is typical for these heating systems.When buying bimetallic radiators, you need to be extremely careful, because due to their significant number on the market, you may have problems choosing the right model. Therefore, before you go to buy radiators, you need to first clarify the parameters of the connected heating mains, because the discrepancy between the technical characteristics of the radiator being purchased and these parameters may cause the bimetallic radiator to fail immediately during subsequent operation. Note that the average operating pressure of these radiators varies according to the figure 3 MPa.When buying radiators, be sure to keep in mind that in most cases a manual air vent valve, kits for left-hand or right-hand connection, various adapters, brackets, plugs, gaskets are purchased separately.Before proceeding with the installation process, it is imperative to tighten all nipple connections on the radiator, which may weaken during transportation. In order to ensure maximum heat transfer when installing the radiator, you need to keep a distance of 11-15 centimeters from the floor, about 10 centimeters from the window sill, and 4-5 centimeters from the back of the radiator to the wall.Additional valves must be installed at the radiator outlet and inlet, which you will need as temperature-regulating parts of the heating. In addition, these valves can also be used to turn off appliances (for preventive cleaning of batteries from accumulated dirt, for example). In addition, you can use them to turn off the batteries in case of accidents in the heating system. To prevent the occurrence of a hydraulic shock when the system is filled with water, the control valve must be opened by 2/3.Later, this valve can be fully opened. It is also recommended to install an air valve, which can be not only manual, but also automatic.As you can see, today it is quite simple not only to buy a radiator, but also all the elements of the heating system to connect it. If you follow these recommendations, you will be able to install and replace radiator batteries yourself without calling “specialists" from the housing department. For beginners, clarity matters more than inflated numbers. Many onboarding guides include 1xbet free promo code while explaining the 100% bonus of up to €130 available for sports bets. In addition, the casino package of $1950 with 150 free spins gives new users enough room to explore slots and live dealer games without feeling rushed.